Shipping to Europe
+7 (495) 150-40-70
About Products Solutions and projects Services Dealers Press center Contacts
  /   Products  /   Industrial facilities LED lighting  /   АtomSvet® Plant  /   Single-module luminaires

Single-module luminaires AtomSvet® Plant

Get free comprehensive information on the products of your interest. Please, order:

Applications

The luminaire are intended to be used for general lighting of premises with harsh operating conditions, with high dust and moisture concentrations: production areas, warehouses, galleries and tunnels of various types, hangars, agricultural facilities, as well as basements, attics and other ancillary facilities.

Operation features

LED luminaires are resistant to operation in cold and moderate climate (UHL 1) when exposed to high humidity up to 98 % at a temperature range from -60 to +60 ˚C.

Start instantly upon the recovery of power supply.

High degree of protection IP67 is ensured by compound casting of the luminaire electric circuit.

Unlike luminaires with traditional light sources they do not require maintenance during their service life. Do not contain mercury and do not require special disposal.

Light source

The luminaires are equipped with LEDs produced by Nichia Corporation, Japan. LEDs have a built-in shunt system and luminous efficiency of at least 130 lm/W.

Design

  • The luminaire housing is made of extruded aluminum and protected by an anodized coating.
  • The lens system integrated into the protective coating is made of special polycarbonate produced by the German chemical company Bayer – Makrolon® LED with a minimum light transmission coefficient of 87%.
  • Class I protection against electric shock.
  • The luminaires have built-in power corrector (cos φ not less than 0.98).
  • Significant colour rendering index, reducing the employees’ visual fatigue and consequently the accident rate in the workplace.
  • No flickering (stroboscopic effect).

Specifications

Power consumption, W 22, 26, 31, 40
Luminous flux, lm 2,000; 2,400; 3,000; 3,600
Supply voltage / Frequency 150–265 V/50 Hz
Colour temperature, K 5,000
Colour rendering index Ra > 80
Operating temperature range –60 to +60 °C
IP code IP67
LED operating life, h 50,000
Dimensions, mm 270 x 200 x 110
Weight, kg 2.2
Read more
AtomSvet® Plant 02-25-3600-40

Recommended: For the overall lighting of premises with severe environment, with increased content of dust and moisture: production premises, warehouses, hangars, storages, garages.

Power consumption: 40 W

Luminous flux: 4,500 lm

Mass of lamp: 2.2 kg

Is an economical and efficient substitute of lighting devices with the following light sources: General purpose incandescent lamps (IL) 300 W, Quartz-halide lamps (HL) 300 W, Fluorescent lamps (FL) 2х36 W, Compact fluorescent lamps (CFL) 60 W, Mercury arc lamps (ML) 125 W, Metal halide lamps (MHL) 70 W

AtomSvet® Plant 02-25-3000-31

Recommended: For the overall lighting of premises with severe environment, with increased content of dust and moisture: production premises, warehouses, hangars, storages, garages, premises of agricultural assignment as well as basements, attics and other auxiliary areas of buildings and constructions.

Power consumption: 31 W

Luminous flux: 3,550 lm

Mass of lamp: 2.2 kg

Is an economical and efficient substitute of lighting devices with the following light sources: General purpose incandescent lamps (IL) 200 W, Fluorescent lamps (FL) 1х58 W, Compact fluorescent lamps (CFL) 50 W

AtomSvet® Plant 02-16-2400-26

Recommended: For the overall lighting of premises with severe environment, with increased content of dust and moisture: production premises, warehouses, hangars, storages, garages.

Power consumption: 26 W

Luminous flux: 2,950 lm

Mass of lamp: 2.2 kg

Is an economical and efficient substitute of lighting devices with the following light sources: Fluorescent lamps (FL) 2х18 W, Fluorescent lamps (FL) 1х36 W

AtomSvet® Plant 02-16-2000-22

Recommended: For the overall lighting of premises with severe environment, with increased content of dust and moisture.

Power consumption: 22 W

Luminous flux: 2,500 lm

Mass of lamp: 2.2 kg

Is an economical and efficient substitute of lighting devices with the following light sources: General purpose incandescent lamps (IL) 150 W, Quartz-halide lamps (HL) 150 W, Compact fluorescent lamp (CFL) 30 W

*Цены, указанные на сайте, не являются публичной офертой. Окончательную стоимость запрашивайте через форму или по телефонам +44(0)203 519 1989.

Installation

Installation height — up to 4 m.

Individual connection with on-surface mounting (bracket) is included to standard luminaire set.

The following mounting types are available at additional cost:

  • On-pipe (ø 50 mm) console mounting;
  • Pivotable mounting;
  • Bracket mounting;
  • Strengthened on-surface mounting.

Items supplied

LED luminaire, junction box, on-surface mounting (bracket), certificate.

Light Intensity Distribution Curves (LIDC)

deep (30°)

deep (30°)

cosine (120°)

cosine (120°)

wide (140° / 110°)

wide (140°/110°)

Get free comprehensive information on the products of your interest. Please, order:


Другие серии промышленных светильников:

Сделать расчет

Short video (2 min.)
Watch Download mp4 (23.9 Mb)

Corporate film (10 min.)
Watch Download mp4 (110.4 Mb)

Video of the manufacturing process and advantages of AtomSvet® LED lighting fixtures

Can't decide?

Contact our manager
by phone
+44(0)203 519 1989
or fill out the form on the web site
and we will try to help you out?
Fill form