Shipping to Europe
+7 (495) 150-40-70
About Products Solutions and projects Services Dealers Press center Contacts
  /   Products  /   Industrial facilities LED lighting  /   Lighting for Public Utilities & Residential Areas

Lighting for Auxiliary Production Facilities, Public Utilities & Residential Areas in Conditions of High Dust Level and High Humidity

AtomSvet® Utility LED Luminaire

The luminaires are intended for use in general lighting systems in hard-to-reach places, in facilities with extreme operating conditions with high levels of dust and moisture.

AtomSvet® Utility advantages

  • Energy Efficiency: the use of LEDs provides maximum reduction in electricity consumption (by 8-10 times as compared with incandescent lamps of the same brightness).
  • Long life span (at least 50,000 h.).
  • Degree of protection against dust and moisture is a minimum of IP65.
  • Aluminum housing with protective powder coating provides improved impact strength and high resistance to any mechanical damage.
  • Vandal-proof design: luminaires are equipped with special recessed hidden screws, which prevent them from being removed.
  • Does not require maintenance.

AtomSvet® Utility

Utility 03-12

Utility 03-15, 03-15 ms

 

Get free comprehensive information on the products of your interest. Please, order:

Example (when installing 1 luminaire)

Luminaire type/characteristics Incandescent lamp - 40 W Switch to luminescent lamp: LL 36 W Switch to Utility LED luminaires 12W
Power consumption, W 40 36 10
Daily operation, hour 24 24 24
Daily power consumption, kW h 0.96 0.864 0.24
Annual power consumption, kW h 350.4 315.36 87.6
Rate for electricity in 2014, EUR 0,15 0,15 0,15
Total for electricity per 2014 year EUR 52,6 47,3 13,1
 
Cost advantage by reducing the energy consumption for 10 years of AtomSvet luminaires operation, EUR Incandescent lamp 463
LL 36 W 401
Energy saving in % Incandescent lamp 75
LL 36 W 72,2
Total for electricity for 10 years, EUR per 20 luminaires. 12332 11099 3083

Estimated parameters: current electricity cost is 0,15 EUR/kWh (incl. VAT), electricity cost increase is 3,5% per year.

Requirements for indoor lighting. AtomSvet® Solution
Energy efficiency: construction norms and rules on lighting must be performed with minimum power consumption
  • The use of LEDs ensures maximum reduction in electricity consumption (by 8-10 times compared with incandescent lamps of the same brightness).
  • The ms version of the luminaires can be additionally equipped with optical and acoustic presence sensor – energy saving.
Operation under conditions of dust exposure (corridors and stairwells), aggressive environment (courtyards ) in areas with special environmental conditions (high level of humidity, dust and smoke)
  • Luminaires’ degree of protection against dust and moisture is a minimum of IP65
Luminaires should be impact resistant and have vandal-proof design
  • The housing is made of die cast aluminum and has a powder metal protective coating.
  • Safety glass is made of impact-resistant optical polycarbonate that provides high resistance to any mechanical damage and shock.
  • In order to prevent dismantling luminaires are complete with vandal-proof screws and a special tool for them.
Fixtures should be small
  • Compact design thanks to small LEDs
Luminaires are usually placed in hard-to-reach places, where maintenance is difficult
  • LED luminaires have a long life span, during which their maintenance is not required
Lighting comfort
  • LED luminaires colour rendering index greatly exceeds the colour rendering index of mercury and fluorescent lamps commonly used for lighting the courtyards covering domestic sites and amenity spaces
Russian electrical networks are characterized by extreme volatility of the supply voltage. Stability of the driver (power supply) to power surges is critical for reliable luminaire operation
  • LED driver is specially developed for use in unstable networks (wide supply voltage range of 150-265 V, short-circuit protection)

Scope of Application

The luminaires are intended for use in general lighting systems in hard-to-reach places, at facilities with extreme operating conditions with high levels of dust and moisture.

Light Source

CREE or Seoul Semiconductor LEDs.

Design

  • The luminaire housing is die cast aluminum and has a powder metal protective coating.
  • The protective lens is made from Makrolon® LED impact-resistant polycarbonate produced by the German chemical company, Bayer- and has the necessary matt finish.
  • Class I protection against electric shock. Power corrector is integrated into the luminaire (cosφ is a minimum of 0.9).
  • No flickering (stroboscopic effect).

Specifications

Power consumption, W 12, 15
Luminous flux, lm 600, 1340
Supply voltage / frequency 150–265 V / 50 Hz
Colour temperature, К 3,700–5,000
Colour rendering index Ra > 80
Operating temperature –40 to +50 °С
Degree of protection IP65
LEDs lifespan, h > 50 000
Dimensions, mm 200 х 170 х 57
Weight, kg 0.8


DUALUX.gif

Download the program to calculate the light DIALux (www.dial.de)

Download luminaire data to calculate the program DIALux (1 MB, rar)

Mounting

Mounting can be made on the wall and ceiling surfaces.

The luminaire is mounted with two screws. The mounting fixture is of a special vandal-proof design.

Mounting on the suspension is possible due to a threaded hole on the inner side.

Suspension height is up to 4.5 metres.

Scope of supply

LED luminaire, mounting fixtures, and certificate.

Light Intensity Distribution Curve (LIDC)

cosine (120°)

cosine (120°)

Item interpretation

Dimensions

Dimensions

Get free comprehensive information on the products of your interest. Please, order:



Order

Additional information:
How did you find us?:
File:
  * required field
 
 

Short video (2 min.)
Watch Download mp4 (23.9 Mb)

Corporate film (10 min.)
Watch Download mp4 (110.4 Mb)

Video of the manufacturing process and advantages of AtomSvet® LED lighting fixtures

Can't decide?

Contact our manager
by phone
+44(0)203 519 1989
or fill out the form on the web site
and we will try to help you out?
Fill form