Shipping to Europe
+7 (495) 150-40-70
About Products Solutions and projects Services Dealers Press center Contacts
  /   Products  /   Floodlighting


Single-module luminaires
Plant 02-16-2000-22
Plant 02-16-2400-26
Plant 02-25-3000-31

Double-module luminaires
Plant 02-50-5600-55
Plant 02-50-6800-70

Four-module luminaires
Plant 02-56-7800-80
Plant 02-56-8700-90
Plant 02-100-11400-100
Plant 02-100-13600-140

Get free comprehensive information on the products of your interest. Please, order:

AtomSvet® Flood. Floodlighting

Floodlighting is widely used in cases where the lighting equipment cannot be placed next to the illuminated surface, and it becomes necessary to illuminate the object from a considerable distance.


Floodlighting requirements AtomSvet® Solution
Powerful and energy-saving directional light sources are required
  • The use of LEDs ensures the reduction of power consumption by 2-3 times in comparison with gas-discharge equivalents.
  • LEDs unlike conventional light sources provide a directed beam from the start
The floodlighting luminaires are exposed to precipitation (snow, rain), and the air is full of dust (lighting of the construction sites, mines, etc.)
  • Floodlighting luminaires are fully sealed and have an IP67 degree of protection against dust and moisture.
  • Anodized aluminum housing and polycarbonate glass resistant to corrosion and aggressive environments ensure full protection from all detrimental influences.
Reliable operation over a wide ambient temperature range
  • Luminaires operate over the ambient temperature range from –60 up to +60°C;
  • Reliable heat removal system and temperature control function ensures the successful operation of AtomSvet luminaires in all climate zones including the Far North
The floodlighting luminaires are often found in the hard-to-reach places, where their maintenance is complicated
  • LEDs have long service life, during which there is no need to replace them
Being exposed to wind and the movement of heavy vehicles luminaires are experiencing wind and vibration strains
  • AtomSvet luminaires design ensures improved vibration and shock resistance.
  • The luminaires comply with the M2 operating condition group according to “GOST 17516.1-90 Electricals. General conditions regarding stability and resistance to external mechanical factors”
Russian power grids are characterized by the extreme instability of supply voltage. Stability of the luminaire driver (power unit) against voltage surges is critical for its reliable operation
  • LED driver was specially developed for operation on unstable grids (wide supply voltage range 150-265 V, impulse noise protection in power networks of up to 1,000 V, and short-circuit protection)


Comparison of traditional light sources with AtomSvet® luminaires

  Previous solution: Metal-halide lamp, 400 W New solution: AtomSvet® Plant 03-100-13600-140 (30⁰)
Quantity 2 2
Power consumption, kW per year 4,906 1,840
Energy saving 63%
СО2 emission reduction over 10 years of AtomSvet lighting systems 13 tonnes
Cost of electric power saved over 10 years of AtomSvet lighting systems 5,400 EUR
A construction site. Original system of lighting – 2 lighting fixtures with metal-halide lamps on crane mast, 400 W.

Calculation values: current cost of power 0.15 EUR/kW h; energy cost increase 3.5% per year; emission volume: 0.42 kg СО2/kW h.


Floodlighting luminaires have been widely used for architectural and decorative lighting of building facades, monuments of architecture and other objects.

Light source

The luminaires are equipped with LEDs produced by Nichia Corporation, Japan.. The LEDs have built-in shunt systems and luminous efficiency of at least 130 lm/W.


  • High quality and reliability of all floodlighting luminaire components.
  • Corrosion resistant anodized aluminum and polycarbonate glass.
  • LED driver specifically designed to operate on unstable grids.
  • Wide operating temperature range (from –60 to +60°C).
  • High degree of protection — IP67.
  • The design of the device allows changing the technical parameters depending on the task.


Supply voltage / Frequency 150–265 V / 40–60 Hz
Power consumption, W 22–140
Luminous flux, lm 22–13,600
Colour temperature, K 5,000
Colour rendering index Ra > 80
Operating temperature range –60 to +60 °C
IP code IP67
LED operating life, h > 50,000
Weight 1/2/4-modular, kg 2.2/3.6/6.4


The recommended installation height is up to 4 m. Individual connection with on-surface mounting (bracket) is included in the standard luminaire set.

The following mounting types are available at additional cost:

  • On-pipe (ø 50 mm) console mounting;
  • Pivotable mounting;
  • Bracket mounting;
  • Strengthened on-surface mounting.

Items supplied

LED luminaire, junction box, on-surface mounting (bracket), certificate.



L x W x H
Single-module —270 x 200 x 110 mm
Double-module — 360 x 200 x 110 mm
Four-module — 670 x 200 x 110 mm

Suitable replacement lamps

ML 125–400 W
HPS 70–250 W
MHL 70–250 W
HL 200–1,000 W

Light Intensity Distribution Curves (LIDC)

concentrated (15°)

concentrated (15°)

deep (30°)

deep (30°)

Switching to illumination with LED floodlighting luminaires is beneficial due to the following reasons:

  • Unlike their analogues using traditional light sources, LED floodlighting luminaires do not require maintenance throughout their entire service life;
  • Do not contain mercury and therefore, do not require special disposal: they are environmentally friendly and do not pose threat to human health and environment;
  • Suitable for operation in unstable networks;
  • Due to their high energy efficiency upon expiry of their payback period they start generating considerable profits;
  • Their design provides a possibility to adjust technical parameters of illumination.

You can check the prices for AtomSvet products from our advisors.

Low voltage LED luminaires obtained a wide usage at industrial enterprises, as well as in lighting of the facilities in the sector of housing and public utilities. Their popularity is directly related to the fact that at low power consumption, they can provide with high-quality light output.

Get free comprehensive information on the products of your interest. Please, order:
Read more



Additional information:
How did you find us?:
  * required field

Short video (2 min.)
Watch Download mp4 (23.9 Mb)

Corporate film (10 min.)
Watch Download mp4 (110.4 Mb)

Video of the manufacturing process and advantages of AtomSvet® LED lighting fixtures

Can't decide?

Contact our manager
by phone
+44(0)203 519 1989
or fill out the form on the web site
and we will try to help you out?
Fill form