Shipping to Europe
+7 (495) 150-40-70
About Products Solutions and projects Services Dealers Press center Contacts
  /   Products  /   Area/ Site lighting

Area/ Site lighting

Almost all works at construction sites are carried out during the night as well. Construction site illumination is the mandatory requirement to round the clock operations both in winter and in summer. Properly arranged illumination, selection and location of light sources and lighting equipment, allow working without slowdown even during the night. Moreover, proper illumination of construction site and uniform luminous flux distribution at workplaces, walkways and driveways, storage sites, welfare facilities, constructed buildings and structures, as well as in dangerous areas during excavation and site preparation, is among the major factors reducing workplace injuries.

Construction site illumination should be uniform and sufficient to perform all construction processes and satisfy all construction norms and regulations; it should be taken into account that construction site conditions do not allow placing illumination equipment in close proximity to it, thus sending luminous flux from a considerable distance.

Currently the following types of light sources are used for construction site illumination: quartz-halogen lamps, MHL, ML, and HPS. One of the most significant disadvantages of such luminaires is their non-resistance to vibration, present on tower and overhead cranes. Thereby, there exists a high probability of lighting equipment failure, which in its turn might cause incidents and construction technology violation.

The installation of powerful, vibration resistant LED luminaires on construction cranes may become a possible solution to this problem. AtomSvet LED luminaires represent energy efficient replacement of traditional light sources. The advantages of their use are: illumination balance of vertical and horizontal surfaces, convenience of lighting equipment mounting and maintenance, simplicity of utilized power network.

Illumination of a construction site with AtomSvet LED luminaires provides a possibility to save money and, equally important, to release electric power. Due to low power consumption and long service life (at least 50,000 hours) AtomSvet LED luminaires will operate many years with no additional costs and with minimum maintenance.

Read more


Short video (2 min.)
Watch Download mp4 (23.9 Mb)

Corporate film (10 min.)
Watch Download mp4 (110.4 Mb)

Video of the manufacturing process and advantages of AtomSvet® LED lighting fixtures

Can't decide?

Contact our manager
by phone
+44(0)203 519 1989
or fill out the form on the web site
and we will try to help you out?
Fill form